86-755-36605011 sales@Jzone-PCB.com
 Chinese English Deutsch
Home Technology Products Quality How to order About us Contact us News Online Quote
 Categories
 Technology
Capability
Equipment
Technology Roadmap
  Products & service
  Quality
  How to order
  About us
  Contact us
  Online Quote
  Why choose JZone-PCB
  Complete PCB Solution
  Full Feature Service
 

Email:sales@JZone-pcb.com
Tel:86-755-36605011                  
Fax:86-755-36605022

 Capability Home > Technology > Capability 
   
 

No.

Parameters

Standard

Complex

1

Base Material

FR2,CEM1, CEM3, FR4 of thickness 0.5,0.8 1.0, 1.6, 2.4, 3.2 mm(High Frequency Materials)

As standard

2

Minimum Copper Thickness

1/2 oz copper or 18 microns, unbalanced copper

As standard

Layers also available on special request.

3

Board Thickness

14 Mils to 125 Mils (0.35 to 3.2mm) can be thicknes for special MLB Back Panels

As standard

3A

Minimum Core thickness for MLBs

6 Mils ( 0.15mm)

4 Mils (0.1mm)

4

OL Track Width/ Space

5/ 5Mils ( 0.127/ 0.127mm)

4 / 4 Mils (0.1mm) Min. 

5

I/L Track Width/ Space

4/ 4 Mils ( 0.1/ 0.1mm)

3 / 3 Mils (0.075mm) Min. 

6

Minimum Finished Hole size

8 Mils ( 0.2mm)

6 Mils ( 0.15 mm )

7

Minimum SMD Pitch

20 Mils ( 0.5mm)

10 Mils (0.25mm)

8

BGA Pitch

39 Mils (1mm)

32 Mils (0.81mm)

9

Cu Thick/ Tr. Width/ Space

35 µ with 5 Mils Track/ 5 Mils Spacing

35 µ with 4/4 Mils

70 µ with 10 Mils Track / 10 Mils Spacing

70 µ with 8/8 Mils

105 µ with 14 Mils Track / 14 Mils Spacing

105 µ with 12/12 Mils

10

Isolation of Pads or Traces or SMTs on ground Planes

10 Mils Minimum (0.25mm)

8 Mils Minimum (0.2mm)

11

Inner Layer Isolation

14 Mils ( 0.35mm)

12 Mils ( 0.3 mm)

12

Minimum Annual Ring I/L Via

5Mils ( 0.127mm)

4 Mils (0.1 mm)

13

Minimum Annual Ring O/L Via

7 Mils ( 0.175mm)

6 Mils (0.15 mm)

14

Minimum Annual Ring Comp

9 Mils (0.225mm)

8 Mils (0.2 mm)

15

Aspect Ratio

8:1

10:1

16

Buried Via

No

Yes

17

Blind via

No

Yes

18

Maximum PCB or Array Size

2L 15" x 20" . 4 L 15" x 20"

As standard

19

Legend Character Width

7 Mils (0.175mm)

6 Mils ( 0.15mm)

20

Carbon (Resistance)

> 20 Ohms

10 to 20 Ohms

21

Peelable Mask Thickness

200 microns

250 microns

22

Minimum Scoring Web

12 Mils (0.3mm)

12 Mils (0.3mm)

23

PCB Edge to Clearance

8 Mils (0.2mm) Minimum

6 Mils ( 0.15mm)

24

Minimum Npth Slot width

1mm

0.8 to 1mm

25

Board Thickness Tolerance

+ or -10%

+ or - 8 to 10%

26

PTH Tolerance

+ or - 3 Mils

+ or - 2 Mils

27

NPTH Tolerance

+ or - 3 Mils

+ or - 2 Mils

28

Routing Tolerance

+ or - 8 Mils ( 0.2mm)

+ or - 6 Mils (0.15mm)

29

Punching

[Single Punch & Remove] or  [Punch & Retain]

As standard

Home | Technology | Products & service | Quality | How to order | About us | Contact us | News
Tel:86-0755-36605011 Fax:86-0755-36605022    www.JZone-PCB.com, All Rights Reserved    Design bywin580.com